UK ADVA FLOW 7110

Description:
UK ADVA FLOW 7110 is a PCE-based concrete superplasticizer for flow concrete with a wide dosage range applicable for various applications.

Uses:
UK ADVA FLOW 7110 is a high range water reducer which is used for different applications such as:
■ Ready mix concrete plants production
■ High performance concrete production
■ Impermeable and dense concrete with smooth surface
■ Self Compacting Concrete (SCC) production


Characteristics / Advantages :
UK ADVA FLOW 7110 is a dual impact admixture and when it is used, the surface adsorption and sterical effects will separate the binder particles. This will result in the achievement of the following properties.
■ High water reduction, resulting in high density and high strength
■ High plasticizing effect, resulting in improved flowability, placing and compacting behavior.
■ Chloride-free, thus harmless to the reinforcing steels
■ Reduced rate of carbonation of the concrete
■ Reduced tendency of shrinkage
■ Improved cohesion behavior of concrete.


Product Data:

Chemical Base ------ Polycarboxylates based liquid

Packaging ------ Gallon 20 Lit, IBC 1100 Kg (1000 liter)

Appearance / Colours ------- Yellowish Liquid

Storage Conditions / Shelf Life ------ 12 months from date of production if stored properly in original and unopened packaging, in dry conditions at temperatures between +5°C and +35°C. Protect from excessive temperature, direct sunlight and frost.

Density ------ 1.09 – 1.15 kg/l at 20°C

pH Value ------ 5.5 – 6.5

Freezing Point ------ -6°C



Consumption / Dosage:
Depending on the expected concrete performance, it is used at a rate of:
■ For plastic concrete: 0,2 to 0.75% by weight of binder
■ For self-compacting concrete: 0.75 to 1.5 % by weight of binder
When adjusting the consistency, high water retarding feature of the additive must be taken into account and excessive water addition to the mixture must be prevented.
Trial batch is mandating for achieving to the optimum dosage.

Application Method / Tools:
UK ADVA FLOW 7110 must be added to the gauging water at ready mix concrete or job site.

Notes on Application / Limitations:
When using UK ADVA FLOW 7110 a suitable mix design has been taken into account and local material sources should be trialed.
UK ADVA FLOW 7110 should not be added to dry cement. UK ADVA FLOW 7110 should be added with the mixing water. When using for the production of self-compacting concrete, suitable mix design must be taken into account.
Before application, suitability tests must be performed. Compatibility

Health and Safety Information:
handling, storage and disposal of chemical products, users should refer to the most recent Material Safety Data Sheet containing physical, ecological, toxicological and other safety related data.

Note:
All technical data stated in this Product Data Sheet are based on laboratory tests. Actual measured data may vary due to circumstances beyond our control.

Approval / Standard:
UK ADVA FLOW 7110 follows the requirements of EN 934 Table 3.1 , 3.2

For product catalog or sample request, please send your request to info@ukctech.co.uk